The braking system is ultimately your car’s most important safety system. Just like tyres, brakes become much less effective as they wear.
At We Fix Any Car Garage Services we carry out brake replacements at very competitive prices. We also offer a free brake check to all our customers for safety and peace of mind.
Do I need a brake repair/replacement?
Brakes show signs of wear and tear just like some other areas of your vehicle. Potential problems to look out for are:
Wear – A squealing or grinding noise indicates that brake pads and or discs require replacement, although some cars have warning sensors to tell the motorist when brake replacement is necessary.
Discs have a minimum thickness in line with manufacturer safety standards, so when discs reach this minimum thickness they have to be replaced. Brake discs should always be replaced in pairs. The pads should be replaced at the same time too.
Pad Wear – The type of vehicle you drive and your driving style will have an effect on how fast your brake pads wear. Low speed braking doesn’t affect the pads as much as high speed braking will.
Distortion – A brake judder normally indicates a distortion/fault in the brake discs, while pulling under braking suggests a fault with the brake callipers or another hydraulic component.
Over time brake discs can wear thin and become “lipped”. When this occurs new pads cannot be fitted without new brake discs as braking performance and safety may be compromised.
Uneven heating and cooling can cause discs to become out of shape. You might notice such damage if your brakes are old and thinning. Avoid braking for long periods, like when driving downhill; it is advised to drive in a lower gear instead, to avoid overheating your brakes.
Brake Fluid – Spongy brakes may indicate a brake fluid leak or that the brake fluid needs changing. Because brake fluid is hygroscopic and absorbs water most manufacturers recommend a brake fluid change every two years.
When braking heavily, car brake systems get extremely hot. This can then cause the brake fluid to boil and eventually vaporise. Hydraulic brakes work on the principle that a liquid cannot be compressed. When the liquid is vaporised is turns from a liquid into a gas which can be compressed, therefore the system cannot perform as designed. When this occurs the brakes will feel spongy and the will not work to their maximum potential.
If your brakes are experiencing any of the above symptoms get in touch and we’ll be happy to carry out a brake check free of charge. We can also carry out a test to measure the moisture content of the brake fluid in your hydraulic braking system.